Half Round Gutter

Colorbond® | Zincalume | Galvanised

Guttering

Half Round gutter is also available to be slotted.

ACCESSORIES

Stop Ends
External Brackets
Internal & External Angles
Pops

JOINING HALF ROUND GUTTER

To join Half Round gutter, reduce the top rib for 25mm to allow for a slip joint. Slide the reduced end into the other end, applying a suitable sealant, then blind rivet together.

EXTERNAL CORNERS

When cutting Half Round gutter lengths, you will need to allow an extra 165mm past the outside fascia. Cut the Half Round gutter ends at 45° angle. Fix external and internal corner over mitred cuts, use rivets or screws and silicon.

INTERNAL CORNERS

When cutting Half Round gutter lengths, you will need to allow for the gutter to go up right to the adjoining fascia. Cut the Half Round gutter ends at 45° angle. Assemble in a similar manner to external corners.