Smoothline Gutter

Colorbond® | Zincalume | Galvanised

Guttering

Smoothline gutter is also available to be slotted.

ACCESSORIES

Stop Ends
Internal Brackets
Internal & External Angles
Gutter Stiffeners
Spring Clips
Pops

JOINING SMOOTHLINE GUTTER

To join Smoothline gutter, reduce the top rib for 25mm to allow for a slip joint. Slide the reduced end into the other end, applying a suitable sealant, then rivet together.

EXTERNAL CORNERS

When cutting the Smoothline gutter lengths, allow an extra 165mm past the outside fascia. Cut the gutter ends at 45° as shown below. Fix external and internal corner over mitred cuts, use rivets or screws and silicone.

INTERNAL CORNERS

When cutting the Smoothline gutter lengths, allow for the gutter to go right up to the adjoining fascia. Cut the gutter ends at 45° as shown. Assemble in a similar manner to external corners.