Trimdek / Multiclad

Colorbond® | Zincalume | Galvanised
Wall Cladding & Roofing

The recommended minimum pitch for a Trimdek roof is 2°.
Trimdek is available in .42 and .48 thickness.

SPECIFICATIONS – ROOF

Cover – 762mm
Single Span – 1100mm
End Span – 1300mm
Internal Span – 1900mm
Fixings – 65mm Roof Zip

SPECIFICATIONS – WALL

Cover – 762mm
Single Span – 2100mm
End Span – 2700mm
Internal Span – 2700mm
Steel Fixings – 10×16 Hex
Timber Fixings – 12×25 Hex

INSTALLATION

ROOF – Trimdek sheets should be laid square to the gutter line and into the prevailing wind. The sheet is fastened at every rib. Trimdek roof sheets must be turned up at the apex and turned down at the gutter line. Side lap fastener is recommended mid span when span exceeds 1200mm.

WALL – Side lap fastener is recommended mid span when the span exceeds 1200mm.

Colorbond® | Zincalume | Galvanised

Build your quote request

Install Type*

Specifications

Install Type

Install Type

Install Type

Aussie Roof Co.

Contact Us:

Ph: (03) 5248 1222
Fax: (03) 5248 6555
E: sales@aussieroofco.com.au

Trading Hours:

Mon - 7:30am to 4:45pm
Tue - 7:30am to 4:45pm
Wed - 7:30am to 4:45pm
Thu - 7:30am to 4:45pm
Fri - 7:30am to 4:45pm
Sat - closed
Sun - closed

Keep your project on schedule.

Get started today.